About Tar and Chip
Tar and Chip Paving
When choosing between two types of paving materials, it is important to consider how much they cost, how durable they are, and how they look. If you are considering tar and chip paving for your home, this article will provide you with a brief overview of the pros and cons of both. Continue reading to learn more about the two most popular types of driveways. We also provide you with tips to make your driveway last as long as possible.
Durability
Unlike asphalt, tar and chip paving has a much longer lifespan. Because it is made in layers, tar and chip won't be as thick as asphalt. However, they are just as durable. Tar and chip is more affordable than asphalt, so you can easily install it on your driveway without having to worry about the cost. Here are some pros and cons of tar and chip paving. Read on to learn more.
While tar and chip driveways are not as durable as asphalt or concrete, they are still very durable, lasting anywhere from seven to ten years. These driveways also feature great traction. The cost of tar and chip paving is typically between $2 and $5 per square foot, depending on the type of material and amount of traffic. They also look good and last for several decades. Nevertheless, tar and chip driveways are generally not suitable for high-traffic areas.
Cost
The price of Tar and Chip paving can vary greatly depending on the type of material used. The standard method involves placing hot liquid bitumen asphalt over a compacted surface. Once this has been completed, a layer of "chip" will be applied. The "chip" can be made of a variety of materials, including recycled concrete or asphalt ground into small particles. Once this layer has been applied, the driveway will be sealed and waterproof.
When comparing the cost of asphalt paving, tar and chip is the cheaper option. The material costs approximately $2 to $5 per square foot. A full tar and chip paving project can cost anywhere from $650 to $3,000, depending on the size of the driveway. Once installed, the tar and chip pavement will last anywhere from seven to ten years. However, homeowners may decide to add another layer after a few years to increase its longevity.
Appearance
The most significant difference between traditional asphalt and tar and chip is their appearance. While asphalt has a 20-year lifespan, tar and chip is almost maintenance free. The tar and chip melts when heated, filling in cracks automatically. The difference between tar and chip and asphalt is striking - tar and chip look like an old gravel driveway. This is why many home owners opt for tar and chip paving on large driveways.
A tar-and-chip driveway is built by first laying a gravel base. Then, hot liquid asphalt is applied on top. Then, loose stones are compacted into the bitumen to create a finished product with a classy appearance. This process eliminates the need for regular sealing, and it's less prone to crack. Thomas and Dustin's Asphalt has the expertise to install this type of paving, providing quality installations.
Maintenance
The process of tar and chip paving maintenance requires that you work with the right equipment and apply the right amount of liquid asphalt. This process is critical for the longevity of the pavement and is usually performed during dry weather. The proper mix of liquid asphalt and water is applied on the existing pavement to ensure that it remains durable. Then, a layer of "gravel" or aggregate is added to the top of the liquid asphalt to create a slip-resistant surface.
In contrast to blacktop, tar and chip paving maintenance is almost zero. Unlike asphalt, tar and chip requires fewer repairs and sealing than blacktop. It does not show visible cracks like blacktop does, so the process is less time consuming. Plus, tar and chip surfaces have the advantage of providing extra traction during snow and wet conditions. Whether your driveway, parking lot, or street is asphalt or tar and chip, these surfaces are easy to clean.
About Oakville, Missouri
Oakville is a census-designated place (CDP) in south St. Louis County, Missouri, United States. The population was 36,301 at the 2020 census. Oakville is 18 miles south of the city of St. Louis and borders the Mississippi and Meramec rivers; the area is part of "South County" (south St. Louis County).
According to the United States Census Bureau, the CDP has a total area of 30.93 square miles (80.11 km), of which 15.93 square miles (41.26 km2) is land and 1.80 square miles (4.66 km) is water.
As of the census of 2010, there were 36,143 people, 13,788 households, and 10,511 families living in the CDP. The population density was 2,268.9 inhabitants per square mile (876.0/km2). There were 14,314 housing units at an average density of 898.6 per square mile (347.0/km). The racial makeup of the CDP was 96.0% White, 0.8% African American, 0.1% Native American, 1.8% Asian, 0.3% from other races, and 1.0% from two or more races. Hispanic or Latino of any race were 1.4% of the population.
There were 13,788 households, of which 32.4% had children under the age of 18 living with them, 65.4% were married couples living together, 7.7% had a female householder with no husband present, 3.2% had a male householder with no wife present, and 23.8% were non-families. 19.9% of all households were made up of individuals, and 8% had someone living alone who was 65 years of age or older. The average household size was 2.61 and the average family size was 3.02.
The median age in the CDP was 43.7 years. 22.8% of residents were under the age of 18; 8% were between the ages of 18 and 24; 21.1% were from 25 to 44; 33.9% were from 45 to 64; and 14.3% were 65 years of age or older. The gender makeup of the CDP was 49.0% male and 51.0% female.
As of the census of 2000, there were 35,309 people, 12,530 households, and 9,923 families living in the CDP. The population density was 2,196.4 inhabitants per square mile (848.0/km2). There were 12,791 housing units at an average density of 795.7 per square mile (307.2/km). The racial makeup of the CDP was 98.19% White, 0.07% African American, 0.01% Native American, 0.92% Asian, 0.02% Pacific Islander, 0.20% from other races, and 0.60% from two or more races. Hispanic or Latino of any race were 1.03% of the population.
There were 12,530 households, out of which 39.1% had children under the age of 18 living with them, 69.6% were married couples living together, 7.0% had a female householder with no husband present, and 20.8% were non-families. 17.3% of all households were made up of individuals, and 5.8% had someone living alone who was 65 years of age or older. The average household size was 2.81 and the average family size was 3.20.
In the CDP, the population was spread out, with 27.0% under the age of 18, 8.9% from 18 to 24, 26.8% from 25 to 44, 27.6% from 45 to 64, and 9.6% who were 65 years of age or older. The median age was 38 years. For every 100 females, there were 97.2 males. For every 100 females age 18 and over, there were 94.0 males.
The median income for a household in the CDP was $68,248, and the median income for a family was $76,223 (these figures had risen to $73,027 and $87,568 respectively as of a 2007 estimate). Males had a median income of $52,123 versus $33,604 for females. The per capita income for the CDP was $26,750. About 2.0% of families and 2.8% of the population were below the poverty line, including 3.3% of those under age 18 and 4.0% of those age 65 or over.
Oakville belongs entirely to the Mehlville School District (R-9) and the St. Louis County Special School District. Oakville High School and Mehlville High School are the two high schools in the Mehlville School District, but only Oakville High School is located in the Oakville area. Oakville Middle School is also located within the Mehlville School district. There are three Catholic grade schools in Oakville: St. Francis of Assisi, Queen of All Saints, and St. Margaret Mary Alacoque.
St. Louis Community College's South County Education and University Center is located off Meramec Bottom Road at Lemay Ferry Road.
The St. Louis County Library Cliff Cave Branch is in Oakville CDP.