Looking for Asphalt Patching in Ellisville, Missouri?

PROFESSIONAL ASPHALT PAVING

We have been paving St. Louis and the surrounding areas for 30 years. We are a family ran and operated business. We cover all asphalt needs. Give us a call today!

Schedule Your FREE Consultation

Quote Home Form

About Asphalt Patching

One of the most common ways of repairing asphalt pavements is to use asphalt patching. It’s a quick and easy method of repairing any asphalt surface, particularly if it’s been damaged by vandals. However, as with all repair work, asphalt patching can leave behind potentially compromising marks that can be hard to remove. That’s why it’s especially important to apply the right type of material, and to use the right tools, to ensure the greatest success.

Before you can patch your asphalt, it must be thoroughly cleaned. This means getting out all the grit and grime that can be seen on the surface. If possible, you should choose a high-pressure water jetting system to wash the asphalt down. If you’re not in a position to do this yourself, call in a reputable company. They’ll likely require a large area of land to work on, so make sure yours is big enough. The cost of this service will depend on the size of the repair job and the frequency of use.

Once your asphalt has been washed down, then you can begin patching. The first tool you will need when doing this is a sharp blade. You should use something that will cut through the asphalt without too much difficulty. Asphalt patching can be quite messy, so you want to make sure you are wearing suitable footwear when working on the asphalt. The safest choice might be to wear work boots.

Another tool you will want to have handy is a paint sprayer. This is especially handy if you don’t want to damage or crack in the asphalt that you are patching. A paint sprayer is also useful in making sure you use the right material. If you have a piece of metal fencing that is exposed to the elements, you can use the sprayer to apply the paint.

After you have everything you need, you will want to start your job. One way to make sure the asphalt patch you are applying is the correct shape is to lay it out on the ground and look at it from different angles. You can also use a spirit level to ensure the height and distance between the asphalt patch and the surrounding area is correct. When you are happy with the height and distance, apply the asphalt. When the asphalt is dry, you can begin working on the next section of asphalt.

There are many ways that you can complete these tasks, but the most commonly used method involves using heavy-duty sponges that are driven onto the asphalt. The sponges will then roll off to the side as the area of the asphalt to be patched is being patched. Make sure you wear suitable safety equipment when doing this.

Once the material has been patched, you will need to cover up the area that was not patched. One way to do this is to use pavement paint. Pavement paint can provide a durable, long-lasting covering for small areas of sidewalk or driveway. If you have a lot of extra space, you can use a large sheet of asphalt that is left unadorned. Just make sure to use caution in order not to damage your sidewalks and driveways.

Asphalt patching can be a big job. It can also be a messy process, especially if there are several layers to patch. If you are going to hire someone to patch your driveway, it is important that they know how to properly patch an asphalt surface. This can make the job go much more smoothly.

Before hiring a contractor to do asphalt patching for you, make sure he or she has the proper equipment. Some of the most important tools he or she will need to include: a spade, steel wool and an angle grinder. A spade will be used to dig up the affected area, followed by steel wool to remove the ground material. After the material has been removed, the spade is used to pave the newly patched area. A grinder is used to smooth out the rough edges between the different layers of asphalt. Most importantly, the crew will need an angle grinder to ensure a neat, even finish.

Before hiring someone to do asphalt patching for you, make sure he or she is licensed and that he or she uses the proper materials and techniques. Ask for before and after photos of previous jobs that he or she has done. You can even ask for references so you can check out the work history of the contractor. You can also ask neighbors and friends and family members who have had the same job done before.

There are many things to consider when hiring contractors for asphalt patching. First and foremost, make sure you get the right person. Don’t choose your friend just because he or she is nearby or has good references. Also, you want someone who will be honest and punctual so there will be no problem if something gets done on time. Finally, choose a contractor who offers a reasonable price for quality work.

About Ellisville, Missouri

Ellisville was settled by Captain James Harvey Ferris of Kentucky before 1837. He brought slaves with him when he settled his property south of Manchester and west of Kiefer Creek Road, and it was here the house that became known as the "Ellis House" was constructed. The bricks used for construction of the house were handmade by the slaves; it was also called the "Brick Place" for this reason.

Captain Ferris sold the house to Vespasian Ellis, a newspaper editor in St. Louis. The Old School Democrat, the Native American Bulletin, the Washington Temperance Paper, and The Native American were among Ellis' work. In 1842, Ellis became the United States consul to Venezuela. He ran several ads in the Native American Bulletin in an effort to sell his Ellisville farm. As a result, it was sold to William A. Hereford in 1842 or 1843. Hereford was a Virginian and is credited with the naming of Ellisville after his former post office in Ellisville, Virginia. Hereford opened the first post office here on May 2, 1843. Some believe that the Ellis House itself actually served as the post office for a time. All historical accounts of the area give the same history, but none state clearly whether the town was named for Vespasian Ellis or by William Hereford for his Virginia post office.

Hereford sold to Samuel Wilson, and he sold to Major Clarkson of Kentucky for whom Clarkson Road is named. Major Clarkson sold to Captain Benjamin F. Hutchinson of Kentucky, a steamboat captain and the owner of at least three steamboats. Captain Hutchinson raised fine horses and planted extensive orchards, greatly improving the surrounding countryside. In 1868, Captain Hutchinson subdivided his farm into small lots.

Adam Doering purchased the brick house and a considerable portion of the land. John Henry William Rasch purchased the house about 1896 from the Doerings. The Ellisville House stood until 1969 when it was razed.

According to the United States Census Bureau, the city has a total area of 4.39 square miles (11.37 km), all land.

Located 13 miles (21 km) west of the western city limits of St. Louis, Ellisville is located approximately 5 miles (8.0 km) south of Interstate 64, five miles north of Interstate 44 and 7 miles (11 km) west of Interstate 270. There are two primary arterial roads which bisect Ellisville: Missouri Route 100 (Manchester Road) and Missouri Route 340 (Clarkson Road). Ellisville is bordered by the city of Clarkson Valley to the north, the city of Ballwin to the east and southeast, unincorporated St. Louis County to the south, and the city of Wildwood to the west.

The 2020 United States census counted 9,985 people, 3,887 households, and 2,680 families in Ellisville. The population density was 2,284.9 per square mile (882.8/km2). There were 4,072 housing units at an average density of 931.8 per square mile (360.0/km). The racial makeup was 82.48% (8,236) white, 2.5% (250) black or African-American, 0.15% (15) Native American, 7.31% (730) Asian, 0.0% (0) Pacific Islander, 1.21% (121) from other races, and 6.34% (633) from two or more races. Hispanic or Latino of any race was 6.6% (639) of the population.

Of the 3,887 households, 31.0% had children under the age of 18; 54.4% were married couples living together; 28.0% had a female householder with no husband present. Of all households, 28.8% consisted of individuals and 19.1% had someone living alone who was 65 years of age or older. The average household size was 2.5 and the average family size was 3.1.

21.9% of the population was under the age of 18, 6.3% from 18 to 24, 21.6% from 25 to 44, 25.2% from 45 to 64, and 22.7% who were 65 years of age or older. The median age was 44.4 years. For every 100 females, the population had 83.0 males. For every 100 females ages 18 and older, there were 85.3 males.

The 2016-2020 5-year American Community Survey estimates show that the median household income was $78,961 (with a margin of error of +/- $6,910) and the median family income was $104,214 (+/- $15,693). Males had a median income of $53,276 (+/- $2,869) versus $34,523 (+/- $6,429) for females. The median income for those above 16 years old was $45,596 (+/- $5,363). Approximately, 1.4% of families and 2.9% of the population were below the poverty line, including 2.1% of those under the age of 18 and 3.1% of those ages 65 or over.

As of the census of 2010, there were 9,169 people, 3,669 households, and 2,469 families living in the city. The population density was 2,080.4 inhabitants per square mile (803.2/km2). There were 3,802 housing units at an average density of 866.1 per square mile (334.4/km). The racial makeup of the city was 91.7% White, 1.9% African American, 0.1% Native American, 4.3% Asian, 0.6% from other races, and 1.4% from two or more races. Hispanic or Latino of any race were 2.4% of the population.

There were 3,621 households, of which 31.8% had children under the age of 18 living with them, 57.6% were married couples living together, 8.3% had a female householder with no husband present, 3.1% had a male householder with no wife present, and 31.0% were non-families. 27.5% of all households were made up of individuals, and 16.2% had someone living alone who was 65 years of age or older. The average household size was 2.47 and the average family size was 3.04.

The median age in the city was 44.7 years. 23.7% of residents were under the age of 18; 5.7% were between the ages of 18 and 24; 21% were from 25 to 44; 29.7% were from 45 to 64; and 19.8% were 65 years of age or older. The gender makeup of the city was 46.7% male and 53.3% female.

As of the census of 2000, there were 9,104 people, 3,209 households, and 2,486 families living in the city. The population density was 2,094.1 inhabitants per square mile (808.5/km2). There were 3,292 housing units at an average density of 757.2 per square mile (292.4/km). The racial makeup of the city was 95.11% White, 1.58% African American, 0.11% Native American, 2.05% Asian, 0.38% from other races, and 0.76% from two or more races. Hispanic or Latino of any race were 1.16% of the population.

There were 3,209 households, out of which 39.7% had children under the age of 18 living with them, 66.9% were married couples living together, 8.2% had a female householder with no husband present, and 22.5% were non-families. 19.4% of all households were made up of individuals, and 9.3% had someone living alone who was 65 years of age or older. The average household size was 2.74 and the average family size was 3.16.

In the city the population was spread out, with 27.2% under the age of 18, 5.7% from 18 to 24, 28.7% from 25 to 44, 23.8% from 45 to 64, and 14.6% who were 65 years of age or older. The median age was 39 years. For every 100 females, there were 91.2 males. For every 100 females age 18 and over, there were 86.8 males.

The median income for a household in the city was $65,016, and the median income for a family was $74,375. Males had a median income of $55,224 versus $32,062 for females. The per capita income for the city was $27,379. About 1.9% of families and 3.5% of the population were below the poverty line, including 3.3% of those under age 18 and 5.4% of those age 65 or over.

Related Pages